66250935-EN - V1.0 - 04/05/15
5
Kristallo Series
Art. KR-AV - Installation instructions
Art. KR-AV
mounting instructions
135cm
Fig. 1
Fig. 3
Fig. 2
Fig. 4
1. Protect the holes to fix the intercom to the flush mounting box then embed the flush mounting box in line with the wall in vertical
position at 135cm height from the floor as shown in
Fig. 1
;
2. As shown in
Fig. 2
, connect the wires using a flat screw driver then setup the dip-switches as per provided connection diagram
or instruction sheet.
3. As shown in
Fig. 3
, once the wires are connected, fix the intercom to the flush mounting box using a Phillips screwdriver and the
two screws provided.
In order to avoid malfunctions, please do not over tighten the fixing screws shown in Fig. 3.
4. Once the intercom is fixed to the flush mounting box, place the front plate against the intercom by inserting the hooks in the
corresponding openings and hook the plate by pushing it down as shown in
Fig. 4
.
5. Test the system for correct operation.
