Videx 4000 Series, Manual

Page: 8 / 36

66250203 - V4.4 - 15/05/22
- 8 -
4000 Series Vandal Resistant Range
Art. 4212 - Installation instructions
HOME PARAMETERS
Home par. menu Parameter Name Programming method Permission Default value
1: Line 1
Line 1 By panel and PC software All /
2: Line 2
Line 2 By panel and PC software All /
3: Line 3
Line 3 By panel and PC software All /
4: Home 2 Home 2 By panel and PC software All Disabled
5: Switch Time
Switch time By panel and PC software All 2 s
LINE 1, 2, 3
Each line can be up to 16 characters long and will appear on the
main screen in standby. Enter the string and press . The have
a blank line enter one or more space characters.
Modify routine
• press
“1”, “2” or “3”
to enter into edit mode;
• enter the string;
• press to save or to delete characters or exit edit mode
without saving.
HOME 2
To enable a second screen which can display a logo.
Modify routine
• press “4” button to enter into edit mode;
• press “4” to enable or disable;
• press to save or to exit edit mode without saving.
SWITCH TIME
Time delay when switching between the two main screens.
Modify routine
• press “5” to enter into edit mode;
• enter time is seconds: it must be between “1“ and “250”;
• press to save or to delete characters or exit edit mode
without saving.
TIME PARAMETERS
Time par. menu Parameter Name Programming method Permission Default value
1: Clock Clock format By panel and PC software All 0-23
Clock By panel and PC software All /
BST/GMT Enable/disable By panel All Enabled
2: Date
Date format By panel and PC software All European
Date By panel and PC software All /
Day By panel All /
3: Trade
Trade enable By panel and PC software All Disabled
Trade start By panel and PC software All /
Trade end By panel and PC software All /
4: Relay Time Relay time By panel and PC software Only Engineer 2 s
5: Speech Time
Speech time By panel and PC software Only Engineer 120 s
CLOCK FORMAT
It changes the clock format shown on the home page.
Select either 12 hour or 24 hour clock format.
Modify routine
• press
“1”
to enter the clock menu;
• press
“1”
to enter into edit mode;
• press
“1”
to switch from 1-12 to 0-23 and viceversa;
• press to save or to exit edit mode without saving.
CLOCK
Set the time on the door panel.
Modify routine
• press
“1”
to enter the clock menu;
• press
“2”
to enter edit mode;
• enter the hour, minutes and seconds (all fields are composed of
two digits). After entering two digits to set the hour it automat-
ically advances to the minutes and then to seconds.If in 12 hour
clock format, after seconds it is possible to select AM/PM;
• After setting the last parameter the time will be saved.
Art. 4212
Audio/video digital front panel Programming