www.videotree.com
Tel: +44 (0)1932 267 797
2
www.videotree.com
Tel: +44 (0)1932 267 797
3
TELEVISION DIMENSIONS
INSTALLATION
Use the dimensions below and diagrams opposite to understand the size of your television and backbox.
WARNING:
If you are unsure about the installation of your television STOP IMMEDIATELY and contact a professional. Incorrect installation
could result in bodily injury or damage to the television.
This guide is provided as a simple overview of the installation process. Please refer to the full User Manual for complete
installation and setup instructions. If you are unsure about the installation of your television STOP IMMEDIATELY and contact a
professional. Incorrect installation could result in bodily injury or damage to the television.
*Measurements are in millimetres (mm) unless otherwise stated.
TELEVISION SIZE
KEY*
27”
32”
42”
46”
55”
A
639
747
986
1073
1266
B
389
452
589
637
747
C
35
43
43
43
43
PACKAGING DIMENSIONS
Length
735
820
1200
1250
1500
Depth
180
100
100
100
200
Height
550
520
650
700
1200
Weight (kg)
16kg
22kg
29kg
35kg
40kg
VESA MOUNT DIMENSIONS
Fixing Holes 100 X 100 200 X 200 400 X 400 400 X 400 400 X 400
WARNING:
When removing your television from the packaging, ensure that you are able to lift the television safely. We recommend that
2 persons are present to lift and move the larger televisions.
When lifting your television, face the screen away from your body and hold the top and the bottom of the frame securely. Do
NOT hold the screen or place excessive pressure on the screen.
NOTE:
Before installing your television, we recommend that you connect the television to a power source and ensure that it is
working correctly.
!
A
B
C
WARNING:
Ensure the cables are long enough to reach your television and any power outlets or external devices.
Ensure the mains supply socket is switched off before connecting your television power supply.
We recommend using at least two persons to lift the television.
The rear of the television is NOT water resistant. Do NOT expose the rear of the television to water. If you do not correctly
seal any gaps between the television and the wall, your television could become exposed to moisture or dust and your
warranty will be voided.
STEP 1
Once you have determined the best position for your on-
wall television, mark out and fix the wall mount brackets
to the wall using coach bolts and wall plugs if required.
Ensure that you correctly measure the fixtures and
fittings to align with your television, ensuring that they
are positioned as straight and level as possible.
Wall plugs
Coach Bolts
Use measurement tools to ensure level mounting
Spirit Level
Keep cables as close to the wall
mount as possible
STEP 2
Once you have fixed your wall mount brackets, install the
wiring required to operate your television - power supply,
HDMI cable, aerial cable etc.
We recommend fixing your wiring into the wall and
keeping the cables as tight to the wall as possible.
Silicon seal between the
edges of the screen and
the wall
STEP 3
We recommend that you test your television once the
wires have been fixed into the wall (this may require two
persons).
Connect the wires to the television and place the television
onto the brackets. Test that your television is working
correctly and that the cables are correctly inserted into
the back of the television before applying sealant.
Once you have ensured your television is working correctly
and that all the cables have been connected, use a silicon
sealant to seal between the edges of your television and
the wall. Ensure that any gaps are completely sealed
to prevent ingress of water and dust to the rear of the
television. Your television is ready for use!