Videotec DCBD, Operating Instructions Manual, Page: 37 / 40

Page 15 MNVCDCBD_0351
ENTER key: used during on screen menu programming.
CLEAR key : used during on screen menu matrix programming. It is also used to reset the active alarms. For
further information see the instruction manual for the matrices/switchers concerned.
7.2 Telemetry switching keys (DCTEL keyboard only)
The telemetry keys are used to control digital telemetry receivers. See the list of receivers that it is possible to
control in the section Compatible Appliances for use with the DCTEL / DCBD keyboard.
The DCTEL keyboard can be used to control up to 16 receivers. When the telemetry keys are
pressed, the corresponding actions are carried out by the receiver with the same input number as the
one displayed on the manual channel.
Examples:
•
LED 1/8 on : When the 4/12 key is pressed the manual channel will switch to input 4 and the receiver with
the address 4 will be controlled
• LED 9/16 on: When the 4/12 key is pressed the manual channel will switch to input 12 and the receiver with
the address 12 will be controlled
7.2.1 Movement keys
The PAN and TILT keys (up/down/left/right): these are used to move the pan & tilt in the 4 directions: Up, Down
(TILT) and Left, Right (PAN). It is also possible to make combined movements by pressing two keys at a time:
up/right, up/left, down/left and down/right.
The AUTOPAN key: this sets the pan & tilt motor in continuous movement between the limit switches in the
Left-Right direction and vice versa (AUTOPAN)
ZOOM TELE and WIDE keys: they activate the corresponding Zoom functions
FOCUS NEAR and FAR keys: they activate the corresponding Focus functions
IRIS OPEN and CLOSE keys: they activate the corresponding Iris functions
AUX key: used with the numeric keys, it activates receiver auxiliaries 1-2-3-4.
Example:
•
Keeping AUX pressed down, press the 1/9 key: aux 1 for the selected receiver will be activated
•
Keeping AUX pressed down, press the 3/11 key: aux 3 for the selected receiver will be activated
PRESET key (Can only be used with receivers that integrate the corresponding function, e.g. the DTRX3):
when used with the numeric keys (1/9 8/16) it will store up to 8 different positions for PAN & TILT and camera
lens status, which can be recalled later by a SCAN (See SCAN).
Example:
• Keeping PRESET pressed down, press the 1/9 key: this will store, in position 1, the current status of the pan
& tilt and lens positions of the camera controlled by the selected receiver.
•
Keeping PRESET pressed down, press the 7/15 key: this will store, in position 7, the current status of the
pan & tilt and lens positions of the camera controlled by the selected receiver.
SCAN key(Can only be used with receivers that integrate the corresponding function, e.g. DTRX3): when used
with the numeric keys (1/9 … 8/16) it will recall up to 8 different positions for PAN & TILT and camera lens
status that were previously stored using the PRESET function (See PRESET).
Example:
• Keeping SCAN pressed down, press the 1/9 key: the pan & tilt motor controlled by the selected receiver will
move to the previously stored position No. 1.
•
Keeping SCAN pressed down, press the 2/10 key: the pan & tilt motor controlled by the selected receiver will
move to the previously stored position No. 2.
To prevent changing the status of the active input/receiver while using one of the function keys
AUX, PRESET or SCAN, first press the(AUX, PRESET or SCAN) function key (and keep it pressed) and
then press the numeric key.