1.
The product shall be installed and serviced by a qualified person.
2.
This product is non-waterproof. Please avoid the sun and rain.
3.
Good heat dissipation will prolong the working life of the controller, please ensure good ventilation.
4.
Please check if the output voltage of any power supplies used comply with the working voltage of
the product.
5.
Ensure all wire connections and polarities are correct and secure
before applying power to avoid
any damages to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Safety information
Malfunctions analysis & troubleshooting
Malfunctions
Causes
Troubleshooting
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote
.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote
.
1
.
No
power
.
2
.
Wrong
connection
or insecure
.
1
.
Check
the
power
.
2
.
Check
the
connection
.
No light
Wiring diagram
Non-dimmable LED light
100-240VAC
Push
Switch (Optional)
Short press,turn on light.
Short press again,turn off light.
-
+
Push-Key
2.4G
Uin=100-240VAC
Iin
=
1.5A
Uout=100-240VAC
Iout=1.5A
Pout=150 360W
-
Temp Range:-30
℃
~
+
55
℃
Note:
The upper Push-key input port can not connect any AC or DC power supply,
otherwise, the product will be damaged.
HD
Distributor:
Euro Tech Corporation Ltd.
6724 Szeged, Hungary
Üstökös str. 12/b
Web: www.videosec.com
