Operation
VQS-200 User Manual
6
© 2009 by VideoQ Inc, all rights reserved
Important Note:
For truly objective evaluation of the display device performance the internal VQS-200 scaler
should be bypassed, i.e. neither spatial nor temporal internal scaling should be applied.
It means that HDMI resolution, interlace mode and frame rate should be set
exactly
matching the
media content file parameters.
For example, the appropriate 1080i60 HDMI mode should be selected via submenu
"Settings/Audio-Video/Display Resolution"
before
playing out "VST 1080i 60" test pattern .
Once selected, the HDMI mode is preserved, even when the VQS-200 is switched on/off by the
Remote Control "Power" button.
However, if the external PSU or main supply line is disconnected, the unit may return to HDMI
"Auto" (safe) mode, which is the lowest resolution available for this particular display. In such
case the submenu "Settings/Audio-Video/Display Resolution" should be re-visited to set or
restore the desired HDMI mode.
Below is brief description of Remote Control functions
"Option" button is important because it enables OSD messages and menus, in particular - media
info, pan & zoom controls, repetition mode (play once, repeat same file, repeat all files in the
folder), etc. This button works as on/off toggle switch.
For full description of Remote Control keys and functions, navigation instructions and complete
list of on-screen menus see separate document "WDAVN00BN UserManual.pdf".