Videopark C PRO Series User Manual Download Page 60

Page: 60 / 97

http://www.videopark.com.cn

Email:

[email protected]

Diagram 4- 31

【

Channel

】

Select the channel for PTZ camera

【

Protocol

】

Select associated dome protocol (e.g. PELCOD)

【

Address

】

select associated dome address, default: 1(Note: this address has to correspond with dome address, or the

dome wills not control.)

【

Baudrate

】

Select the dome baud rate and control, default is 9600.

【

Data Bits

】

default: 8

【

Stop Bits

】

default: 1

【

Parity

】

default: None

4.6.2. ALARM OUTPUT

This menu manages alarm output parameters and displays the current state of Alarms

Diagram 4- 32

【

Channel

】

alarm port

【

Auto

】

alarm output is determined by the alarm output menu, while in auto mode.

【

Manual

】

alarm output is on and the status is active.

【

】

alarm output is off and the status is inactive.

【

Status

】

current status of alarm output

Summary of Contents for C PRO Series


































































































Search results

Summary of Contents for C PRO Series

Reviews:

Brands by name

Popular brands

Videopark C PRO Series, User Manual

Search results

Summary of Contents for C PRO Series

Reviews:

Brands by name

Popular brands