Page 4
Page 5
Normal Operation
Making a Call from a Entrance Station to a Handset
The system is ready to use when the Entrance Station displays
on it’s LEDs.
To make a call , enter the related 4 digit unit No. For example;
Unit No. 7
Æ
0007
Unit No. 70
Æ
0070
If an error is made when entering the No. press
“
✻
”
key to clear the entry.
Following the 4 digit entry, the Entrance Station extends the call automatically; in this phase,
the melody sounds on both Entrance Station for approximately 30 sec. and the Video Handset
for approximately 5 seconds if not answered. Video screen of Handsets will be on
approximately 30 seconds and display the image from the Entrance Station camera.
If the Handset of the unit called is in use or does not exist, a series of short beep for 7 seconds
will be heard as an error message.
Making a Call from a Entrance Station to the Guard Station
Press ‘#’ button to call guard.
If the guard station is in use or does not exist, a series of short beep for 5 seconds will be heard
as busy tone.
Door opening by the password at the Entrance Station (Optional Extra)
Door can be opened by pressing “
✻
” and a 4-digit password.
Door opening from the Handsets
During the conversation, the electric door can be activated by pressing the
button on the
handset. A melody will be heard to indicate opening the door on handset. The Entrance Station
displays
during the door open.
Monitoring Entrance area
By pressing
button without lifting hand-piece, images from each Entrance Stations
can be
display on the screen one after the other. The monitor will be turned off 30 second later
automatically or can be turned off manually by picking up and hanging up the hand piece.
The second call
Thanks to multi-audio channel capability, one Video/Audio and up to 7 audio conversations (in
Standard System 1 additional audio conversations) can be made on a system simultaneously.
(The second call and voice conversation from different Entrance station to different Handset can
be made even if someone uses the system.) Please note there will be no image on the Video
Handset screen for the second call.
Line Busy condition
When all of audio channels are engaged, a series of short beep for 5 seconds will be heard as
busy tone.
With Guard Station (TVG-700 / TAG-700)
Making and answering a Panic Call to the Guard Station (caretaker station)
Press the
button on handset for 2 seconds. Press again to mute beeping
noise.
For example, if a panic call is made from Unit 101 then
ÅÆ
will be displayed on the Display Unit with a loud alarm sound.
Making a call from the Guard station to a Handset
Pick up the hand piece and press unit No in 4 digit.
A melody will be heard if the call is made properly.
Making a call from Handsets to Guard Station
Pick up the hand piece from the handset and press
button. A melody will be
heard if the call is made properly. If the guard station is in use or does not exist, a
series of short beep for 5 seconds will be heard as a busy tone.
Connection a call from a Handset to another Handset through the Guard Station
During conversation with a Handset, press Hook Switch on Guard Handset for 0.5
sec and enter associated unit No. than hang up (Optional Extra).
Operating the Message Indicators from the Guard Station
Guard can make the Message Indicator of Handsets to blink to inform the resident
that the
guard has a message.
To blink the Message Indicator, press “
✻
” then 4 digit Unit No. then hang up.
To cancel it, press “#” then 4 digit Unit No. then hang up.
TMN-700 Video Handset
button : Monitor/Key
Press to open associated door.
Press to display entrances on monitor.
Pick up the handset and press it to call
Guard
button : Panic
Press 2 Seconds to call Guard Station
LED : Message Indicator
Normally Off, Blinks when guard has a
Message. Automatically off when call the
Guard station by picking up the hand
piece.
