Doc # INS-45MX-Series
Issue Date: 9/28/2011
Revision: E
Page 11 of 26
8.
OSD Architecture
8.1.
Video Function 10”, 15”, 20”
Press
SOURCE
to select a video input:
Press the MENU button to bring up the OSD Menu.
Press
again to select VIDEO, then press
ITEM twice to enter submenu.
As shown, press
keys to adjust selection.
Figure 4.
Example
Note: In remote control, press
key to adjust.
(After adjustment, the monitor will store new settings)
Contrast
Permits adjustment for contrast between light or dark areas of the picture.
Brightness
Adjusts the overall picture shade and brightness. Tip: Use the Brightness to make details in the dark areas
of the picture to be just visible, and Contrast to brighten the picture without causing video noise and
foreheads to turn white.
Color
Adds color to the black and white picture content (of a color signal), and is usually set for viewer's
preference in color saturation.
TINT
Adjusts the colors on the screen. Reds and yellows are most noticeable. Tint also sets for pleasing facial
tones.
Note: Appears in NTSC mode only.
Sharpness
Sets the desired sharpening enhancement to the picture.
Video
Contrast
Brightness
Color
Tint
Sharpness
Menu
Sub-Menu
3D Comb
(45M20DX)
