4.
After finishing setting up an Action, press the
Near
key to one-upper level menu (Step 2).
Move cursor
Up/Down
to select Action number
and repeat Step 2 ~ Step 3 to edit other
selected Groups.
5.
After finishing set up on all Actions, press
FAR
key to exit. Then cursor will move to “SAVE”.
Press
Near
key to save data.
10.12.System Initialize (10x Zoom Model)
Clear All Data
Deletes all configuration data such
as display, camera, motion setup
and so on.
Clear Display Set Initializes Display Configuration
Clear Camera Set Initializes Camera Configuration
Clear Motion Set
Initializes Motion Configuration
Clear Edit Data
Deletes Preset Data, Swing Data,
Pattern Data and Group Data
Reboot Camera
Reboots Zoom Camera module only
Reboot System
Reboots Speed Dome Camera
System
Doc # INS 20Z704T-PZ10
Issue Date: 08/13/2009
Revision: B
Page 35 of 40