Videology 20/21Z404, Communications Manual, Page: 18 / 28

5. General Control Commands -1
Command Message Command Packet Command
Option
Contents
Reset camera *NN71XXXXYY Reset the camera
ID on / off *NN72XXXXYY
Toggle the camera ID.
ON
→ OFF → ON…
ID read
*NN73XXXXYY
*RR000000YY
RR x
Read Current Camera ID
→ 00 ~ FF hex (total 256 IDs) Camera ID
ID change *NN74PPXXYY PP x
Change Camera ID
→ 00 ~ FF hex (total 256 IDs) New Camera ID
Key Action *NN75PPXXYY PP x
Key Action will be activated by this command.
→ Key Code
See Key action command
Power on / off *NN76PPXXYY
PP 00
01 Camera Power ON/OFF
→ OFF
→ ON
ID check *NNA4PPXXYY
PP 00
01
Camera will (not) check the camera ID
→ Disable ID check
→ Enable ID check
Set the transmission
of Command
Response Packet *NNA8PPXXYY
PP 00
01
(Don’t) Transmit Command Response Packet
→ Enable Transmission of Command
Response Data
→ Don’t Transmit the Command Response
Data
Doc # APN 20/21Z704 22X
Comm.
Issue Date: 3/25/2005
Revision: E Page 18 of 28