EMEA SALES
2, rue Alexis de Tocqueville
92160 ANTONY
FRANCE
Phone +33 (0)1 55 59 10 25
Fax +33 (0)3 90 20 66 36
© 2007 RSI VIDEO TECHNOLOGIES™ Videofied
®
is a Registered Trademark of RSI VIDEO TECHNOLOGIES™.
S
2
View
®
is a registered trademark of RSI VIDEO TECHNOLOGIES™. Specifications subject to change without notice.
USA SALES
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
USA
Phone 877-06-5800
Fax 651-762-4693
www.videofied.com
Mounting
>
Use proper tools and hardware for mounting the unit.
>
Mount outdoors under eves to help prevent direct contact
from elements.
>
Mount on front of structure where strobe light is clearly
visible to responding authorities.
Regulatory Information
FCC Part 15
This device complies with FCC Rules Part 15.
Operation is subject to the following two conditions:
1.) This device may not cause harmful interference and,
2.) this device must accept any interference that may be
received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by RSI VIDEO
TECHNOLOGIES, Inc. can void the user’s authority to operate the
equipment.
Specifications
Panel Compatibility
VIDEOFIED V6000/VISIO1000/V7000
Operating Frequency
915/868/920 MHz
Radio type
Spread Spectrum Bidirectional RF
Power Requirements
Four 1.5 V Alkaline batteries
Battery Type
D size alkaline
Power Output
105 dB @ 1 meter
Operating Temperature
-13° - 158° F (-25° - +70° C)
Maximum Relative Humidity
70%, non-condensing
Dimensions
(LxWxD): 9 in. x 6-1/2 in. x 3 in.
(227 mm x 166 mm x 80 mm)
Weight
31 oz./880 g (without batteries)
Approvals UL / FCC (SE650)
CE / EN50131 / EN300220 / INCERT/ IDA / NCP (SE550)
A-Tick (SE750)
1
Remove batteries.
2
Hold unit up against
mounting surface and
mark the three
mounting holes.
3
Drill pilot holes
and install anchors
where needed.
4
Place unit on mouning surface so mounting holes
line up with pilot holes/anchors and secure unit with
appropriate screws.
5
Install batteries, observing correct polarity.
6
Place the flash wire of the cover to the siren.
7
Attach front cover.
Mounting Holes
I N S T A L L A T I O N I N S T R U C T I O N S
Exterior Siren/Strobe Model SE650/SE550/SE750
