13.
Press
ESC/NO
three times to
return to BADGES ACCESS CODES.
14.
Repeat steps 2 - 12 to continue
programming codes.
You can change the access level
assignments as needed anytime, using
the following steps.
1.
Make sure the system is in Level 2 or 3.
2.
Press either arrow button until the
display shows BADGES ACCESS CODES.
3.
Press YES. The display shows BADGE
OR CODE. Enter a Level 2 or 3 access
code +
YES
. The display shows
ENTER A BADGE/CODE.
4.
Press the right arrow button once.
The display shows BADGES/CODES
CONFIGURATION.
5
.
Press
YES
. The display shows the
first programmed access code.
6
.
Press either arrow button until the
desired code appears, then press
YES
. The display shows MODIF
NAME BADGE/CODE.
7.
Press the right arrow button once.
The display shows ACCESS LEVEL 3.
8.
Press
YES
. The display shows
ACCESS LEVEL LEVEL:3.
9.
Press either arrow button until the
desired level assignment appears,
then press
YES
. The display shows
the new level assignment.
10.
Press
ESC/NO
.
11.
Repeat steps 5 - 9 for additional
code configurations.
Code No
Code Name
Level
Changing Access Level Assignments
V i d e of i e d S e c u r i t y Sys te m O wn e r s M a n u a l
13
