ZX-580SR240 / CX-580SR240 Manual REV.B May 2013
5
WIRELESS CAMERA SETUP – MODEL # ZX-580SR240 ONLY
The
ZX-580SR240
Wireless Camera features Eight User Selectable Channels for Multiple Video Links.
Channel Selection
For the wireless video link to work, both the wireless camera and receiver must be set
to the same channel.
CHANNEL ONE
5.725GHz
CHANNEL FIVE
5.809GHz
CHANNEL TWO
5.752GHz
CHANNEL SIX
5.828GHz
CHANNEL THREE
5.771GHz
CHANNEL SEVEN
5.847GHz
CHANNEL FOUR
5.790GHz
CHANNEL EIGHT
5.875GHz
Antenna Connection – ZX-580SR240 Only
Carefully thread the antenna onto the connector of the camera.
Do not use a wrench or a tool –
Hand Tighten Only.
For best Transmitting pattern,
ensure the antenna is vertical
Video Connection – ZX-580SR240 & CX-580SR240
Connect the BNC-Female jack to your video viewing / recording device. To quickly and conveniently view your
camera settings or to adjust your focus and zoom, connect to a hand-held monitor.
Power Connection – ZX-580SR240 & CX-580SR240
j
Step #1
- Connect the 2.1mm barrel, 12VDC power supply Model # PS-121C Class V CEC in the 2.1mm Jack.
Step #2
– If stripping the power supply cord, use the included DC Power Jack Adaptor Model # PS-21FBRL
Important:
The ZX-580SR240 & CX-580SR240 cameras are not compatible with 24AC power supplies
Step # 1
- Remove the Cover Cap from the bottom of
the camera housing’s Channel Selection Port using the
included cover opener.
A Coin or Flathead Screw Driver will also work.
Step # 2
- Rotate the rotary switch to set your channel.
Both the Camera and Receiver must be set to the same channel
Step # 3
- Replace the Cover Cap back onto channel selection port and tighten to
ensure a water tight seal.
You Must Replace the Cover Cap to Ensure a Water Tight Seal
BNC-Female Video Connection
2.1mm Power Jack Connection
PS-121C
PS-21FBRL
