7
GVI Security
2. Connecting the PTZ Dome Camera
Please refer to the following sections to connect, set and operate the PTZ Dome Camera. In order to control
the camera, basically a control keyboard or other control device is required.
2.1 Package
Content
Before proceeding, ensure that the contents match the items listed below. If any item is missing or has defects,
DO NOT install or operate the product and contact the dealer for assistance.
PTZ Dome Camera with
Outdoor Mount Kit
M3 Standard Screw (x1)
M3 Security Screw (x1)
M5 Standard Screw (x1)
M5 Security Screw (x1)
Lubricant
Data Cable for Power Supply, Video Alarm and RS-485 (AC
24V)
Optical Cover
Security Torx
Quick Guide and
User Manual
Product CD
2.2
Description of Camera Parts
Configuring the PTZ Dome Camera’s ID and communication protocol is required before connecting the
camera to other devices. The switches used for configuring these settings are located on the camera’s back
plate. Additionally, the 22-Pin Connector for Data Cable connection and ISP Connector for firmware upgrade
kit connection are also set on the back plate.
Please refer to the diagram and table on the following page for using each switch/connector.
