Audible Signals (Beeps)
The MemoCam unit can be configured to emit
an audible signal (beep) when:
You arm the unit – Long beep.
You enter a disarm code – Short beep after
each button is pressed.
You disarm the unit – Two short beeps and
one long beep.
In Disarm mode – A recurring short beep.
The Multimedia Card is not inserted – A
recurring short beep.
The configuration is upgraded by inserting
a Multimedia Card with an updated
configuration – One short beep.
The configuration returns to the factory
default – Three short beeps.
Audible signals can be enabled or disabled.
Refer to the MemoCam Software Manual.
12
¡
