Vidao PDV707KIT, Instruction Manual

Page: 7 / 16

•
To use Fast Reverse:
o
On the DVD Player: Press & Hold the NAVIGATION LEFT /
VOLUME DOWN / F.REV button (6)
§ Each time the NAVIGATION LEFT / VOLUME DOWN /
F.REV button (6) is Pressed & Held playback will scan
backward at x2, x4, x8, x16, and x32 normal speed.
o
On the Remote: Press the F.REV button (13)
§ Each time the F.REV button is pressed playback will scan
backward at x2, x4, x8, x16, and x32 normal speed.
o
Press the PLAY / PAUSE button on the DVD Player (2) or
Remote (2) to resume normal playback.
USING THE NAVIGATION BUTTONS
When navigating the Menu screen of your DVD, or the SETUP Menu of the DVD
player, use the
Navigation buttons (4, 5, 6, & 7) on the DVD player, or on the
Remote (4, 5, 6, 7) to highlight your desired selection on the screen.
Once you have highlighted the selection press the
OK button (8) on the DVD
player, or the ENTER button (8) on the Remote to select the highlighted option.
SETUP MENU
The Setup Menu allows you to choose your preferred settings for the operation of
the DVD Player.
NOTE:
During DVD playback some options in the Setup Menu are not available.
To access the full Setup Menu first STOP DVD playback and then follow the
instructions below.
Access the Setup Menu by pressing the
SETUP button on either the DVD Player
(10), or the Remote (16) .
To make changes to the settings simply use the
Navigation buttons (4, 5, 6, 7) on
the DVD player or on the Remote (4, 5, 6, 7) to highlight your desired selection,
then press either the OK button (8) on the DVD player or the ENTER button (8) on
the Remote to confirm the highlighted selection.
•
SYSTEM SETUP
o
TV DISPLAY - Choose either 16:9, 4:3PS, or 4:3LB according to you
the aspect ratio of your TV.
§ 16:9 : Use this setting if you are using a 16:9 format