Victron energy Quattro 24, Manual

Page: 30 / 204

26
8. TECHNICAL SPECIFICATION
Quattro 24/5000/120-100/100 48/5000/70-100/100
PowerControl / PowerAssist Yes
Integrated Transfer switch Yes
AC inputs (2x) Input voltage range: 187-265 VAC Input frequency: 45 – 55 Hz Power factor: 1
Maximum feed through current (A) AC-in-1: 100A AC-in-2: 100A
Minimum PowerAssist current (A) AC-in-1: 11A AC-in-2: 11A
INVERTER
Input voltage range (V DC) 19 – 33 38 – 66
Output
(1)
Output voltage: 230 VAC ± 2% Frequency
:
50 Hz ± 0,1%
Cont. output power at 25 °C (VA)
(3)
5000 5000
Cont. output power at 25 °C (W) 4500 4500
Cont. output power at 40 °C (W) 4000 4000
Peak power (W) 10000 10000
Maximum efficiency (%) 94 95
Zero-load power (W) 25 25
CHARGER
Charge voltage 'absorption' (V DC) 28,8 57,6
Charge voltage 'float' (V DC) 27,6 55,2
Storage mode (V DC) 26,4 52,8
Charge current house battery (A)
(4)
120 70
Charge current starter battery (A) 4
Battery temperature sensor yes
GENERAL
Auxiliary AC output Max load: 50A Switches off when in inverter mode
Multi purpose relay
(5)
Yes, 3x
Protection
(2)
a - g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
General purpose comm. port Yes, 2x
Common Characteristics Operating temp.: -20 to +50°C (fan assisted cooling) Humidity (non condensing) : max 95%
ENCLOSURE
Common Characteristics Material & Colour: aluminium (blue RAL 5012) Protection: IP 21
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
230 V AC-connection M6 bolts
Weight (kg) 31
Dimensions (hxwxd in mm) 444 x 328 x 240
STANDARDS
Safety EN 60335-1, EN 60335-2-29
Emission / Immunity EN55014-1, EN 55014-2, EN 61000-3-3
1) Can be adjusted to 60 Hz and to 240V
2) Protection
a. Output short circuit
b. Overload
c. Battery voltage too high
d. Battery voltage too low
e. Temperature too high
f. 230VAC on inverter output
g. Input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 25 °C ambient
5) Programmable relays which can be set for general alarm, DC undervoltage or genset start signal function
AC rating: 230V/4A
DC rating: 4A up to 35VDC, 1A up to 60VDC