Victron energy Peak Power Pack, Manual

Page: 11 / 52

7
E
N
N
L
D
E
It is important to use two screw
wrenches for mounting the cables, to
prevent forces to the Peak Power Pack,
which might damage internal
components
The maximum bolting torque is 6 Nm.
6.2 Connection of the power adapter (DC in)
At the input connection ( 2 ), the supplied 12Vdc, 1A, power adapter can be connected, so
that the Peak Power Pack can be charged from the mains. The power adapter has to be
connected to the mains socket-outlet.
6.3 Connection of the input (+ DC in -)
A 12Vdc voltage supply can be connected to the input
connection ( 3+ and 3- fastons), such as a 12V car
voltage (so that the Peak Power Pack is charged from
the car dynamo/battery) or a 12Vdc solar panel.
The wires to this connection must be fetched twice
through the supplied ferrite ring to prevent that the Peak
Power Pack during charge might cause radio jam. The
ferrite ring must be located close to the Peak Power
Pack.
6.4 Connection of an external push button
An external push button can be connected to the input connection (
4a
and
4b
fastons). This
can be useful if the Peak Power Pack is mounted out of easy reach. This external push
button must be normally open. This push button has the same function as the internal push
button near the LEDs.