Last update: 2022-07-13 08:19
venus-os:gx-lte https://www.victronenergy.com/live/venus-os:gx-lte?rev=1657693164
https://www.victronenergy.com/live/
Printed on 2022-10-18 09:19
5. Status
Status Bar
Cellular modem status can be checked at a glance by looking at the status bar.
Icon
Details
Cellular modem is connected to network, but not to the internet (no data connection).
Either on purpose, because an ethernet or WiFi connection is available.
Cellular modem is properly configured, the 4G/3G/E/etc icon reflects that the cellular modem
internet connection
is in use and what type of connection is applied.
WiFi is available and its internet connection is in use. WiFi has priority over cellular
connection.
SIM PIN code is required.
Roaming, only informative. To use internet connection while roaming it needs to be enabled
in
Settings → GSM modem → Allow roaming.
SIM Status
Status
Description
Ready
SIM card is installed properly and registered to the network
SIM not inserted SIM card is missing or not inserted properly. SIM tray might hang out a little.
PIN required
SIM card requires 4 digit PIN for unlock.
PUK required
SIM is locked due to wrong PIN inputs. 8 digit PUK is required to release the lock
state.
SIM failure
SIM does not respond - might be broken
SIM busy
SIM is in busy state
SIM wrong
Type of SIM is not supported
6. Trouble shooting
There are many reasons for a modem internet connection to not work. Carefully go through each step
of this trouble shooting guide. Make sure to start at the first step. When asking for help, make sure to
mention each step taken and the result.
Step
Details
1 Power
Check that the blue LED is either lit continuous or blinking
2 USB connection
The modem must be connected to USB, and visible in the Settings → GSM
modem menu
3 Simcard status
Check the SIM Status in the menu, it must show “Ready”. It will show “SIM not
inserted”, or “PIN required”, or “PUK required” and more related errors when
there is a problem. Please refer to the
4 Signal strength
1 bar minimum for VRM logging, 2 or 3 bars are necessary for a working remote
console