BEFORE USING THE UNIT
As the unit may become warm during operation, always leave
The voltage supplied to the unit should match the voltage as printed on the rear panel.
If you are in any doubt regarding this matter, consult an electrician.
Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or
close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat,
cold or moisture.
Do not place the unit on an amplifier/receiver.
Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a
foreign object should get into the unit, contact your dealer or service company.
When removing the power plug from the wall outlet, always
To keep the laser pickup clean, do not touch it, and always close the disc tray.
Do not attempt to clean the unit with chemical solvents as
Keep this manual in a safe place for future reference.
DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speed. Do NOT lift or move the unit during playback.
Doing so may damage the disc or the unit.
WHEN MOVING THIS UNIT
When changing the unit’s location or packing the unit for moving, be sure to remove the
record or disc. Moving this unit with the record or disc loaded may result in damage to this
unit. If the unit is to be packed and moved a great distance, it is also advisable to tighten
the turntable transport locking screw.
sufficient space around the unit
for ventilation.
pull directly on the plug, never
yank the cord.
this might damage the finish.
Use a clean, dry cloth.
7
Summary of Contents for VSC-550BT
Page 17: ......
