SETUP/BASIC OPERATION
Setup
1. Remove white protective needle cover by gently pulling towards front of unit.
2. Remove any packaging materials from the unit.
3.
Note:
- It is strongly recommended that this product should be operated
only from the type of power source indicated on the marking label.
Basic Operation
1. Press the POWER button to turn the unit on.
2. Select mode by turning the BT/PHONO KNOB.
3. Rotate the VOLUME KNOB to adjust to the desired sound level.
Listening through RCA LINE OUT
For amplifier device listening, first reduce the volume level to minimum. Insert the
white and red plugs on the RCA cable into the unit, then insert the opposite end
into the amplifier device. Be sure to connect the white plug to the white jack and
the red plug to the red jack.
Listening through Earphones/Headphones (not included)
For private listening, first reduce the volume level to minimum.
Insert your headphones’ plug into the 3.5mm jack, then
adjust the volume up by turning the VOLUME KNOB.
Note:
The speakers will automatically be deactivated
while headphones are plugged in.
CONDENSATION WARNING:
When the unit is moved from a cold or warm place, or is used following a sudden
temperature change, there is the danger that water vapor in the air may condense
on the unit, preventing proper operation. In such cases, leave the unit for 1-2 hours
after plugging it into an AC outlet to allow it to stabilize at the temperature of its
surroundings.
Connect the power adapter to the DC Input jack to power on the unit.
5
