2
BLUETOOTH OPERATION
1. Turn the power switch to ON position, device will power on in Bluetooth mode.
NOTE: This is the default mode when an AUX cable or USB input is not in use.
2. The speaker will now be in Bluetooth pairing mode. The Bluetooth LED will illuminate & flash blue.
3. Turn on the Bluetooth feature of your Bluetooth enable device. Locate “VICTROLA ROADIE”
on your device. NOTE: Lower volume on speaker to avoid sudden loud audio.
4. Select “VICTROLA ROADIE” from the device list when it appears on your device screen.
If required, enter pass code “0000” to pair (link) the speaker with your device.
5. After successfully pairing your device with the speaker, you will hear an audible pairing sound
indicating it is paired.
6. Adjust the Volume, Bass and Treble level by rotating the related knob on the speaker.
7. Press the Volume Knob / Next Function to play the next song in Bluetooth mode.
8. Press the Bass Knob / Play/Pause Function to pause or resume playback in Bluetooth mode.
9. Press the Treble Knob / Previous Function to play the previous song in Bluetooth mode.
NOTE:
1. Refer to manual of your cell phone or other Bluetooth enabled device for Bluetooth
operation, since it may vary in different models.
2. If your Bluetooth enabled device does not support A2DP, it will not play the music through the
speaker, even after it's paired (linked).
3. The speaker will reconnect with the previous connected phone when its power ON again.
4. If you want to connect the speaker to another cell phone after pairing successfully,
disconnect with your current device to set the speaker to pairing mode again.
USB OPERATION
Turn the power switch to ON position, then insert a USB flash drive (not included).
The speaker will automatically change to USB mode. (LED indicator will illuminate Red & Blue)
The operations of the knobs and functions are the same as Bluetooth mode.
NOTE:
The device supports up to 64GB flash drive (and part of 128GB flash drive, with mixed files).
Large, non-music files may affect the device performance when reading the USB flash drive.
Device does not support external device charging.
AUX-IN OPERATION
You can play other music sources (iPod, MP3 or other digital audio players) through the speaker by
connecting the AUX-IN JACK to your external player’s audio out jack or headphone jack.
1. Plug one end of an audio cable (not included) into the Aux-In JACK. Speaker will automatically
switch to AUX mode. LED indicator will illuminate RED.
2. Plug the other end of the cable to the headphone jack of your digital audio player.
3. Play the external device plugged into the Aux-In JACK.
4. Adjust both volume controls on the speaker and the external device to a desireable audio level.
5. Adjust the Volume, Bass and Treble level by rotating the related knob.
NOTE:
1. The Previous / Next and Play / Pause functions will not operate while the speaker is in
Aux-In mode.
2. You may need to adjust both the volume controls of your external device and the speaker
to obtain the desired audio level.