- During playing, press the button to stop.
11
AUX-IN OPERATION
BLUETOOTH OPERATION
- Press the REPEAT button on the remote control once to repeat one track, press
it again to repeat all tracks, press it the third time to cancel repeat playing.
- Press the button repeatedly to switch to random track and play randomly.
Programming:
- Press the PROG button on remote control, "P01" will appear on display for
one second then "00" will blink on the display.
- Press the PROG button on the remote control to confirm programming.
- Repeat the above steps to program up to 20 tracks.
- To cancel programming playing, press the button twice.
- After programming, press the button to play the programmed tracks.
- Press the or button to select the track for P01.
An external device (e.g. smartphone, MP3 player, tablet, etc.) can be connected
to this unit's speakers via AUX-IN.
1. Plug one end of the AUX-IN Cable into the AUX-IN jack on the unit.
2. Plug the other end of the AUX-IN Cable into the headphone jack or Aux Port
on your external device.
4. Power on the connected external device and start playing the music as usual.
3. Press the FUNCTION button on the unit or on the remote control to switch to
AUX-IN mode, "AUX" will appear on the display.
1. Press the FUNCTION button on the unit or on the remote control to switch to
Bluetooth mode, "BLUE" will blink on the display.
4. Once your device is connected successfully, "BLUE" will stop blinking on
the display.
While playing:
3. Select "ITCDS-5001" from the pairing list to connect to the unit.
2. Turn on Bluetooth on your external Bluetooth device and open your device’s
Bluetooth Setting Menu.
- Press the or button to skip to the previous or next track.
- Press the button to pause, press the button again to resume.
