9
7. To return to the previous or skip tracks, press the corresponding button (
or
).
8. To Fast Forward / Rewind within a track, press and hold down the corresponding skip button
(
or
) until the desired position is reached.
9. To stop playback, press the STOP ( ) button.
Important:
- Never place more than one disc on the tray.
- The disc must be placed in the center of the disc tray. An incorrectly
loaded disc can permanently damage the tray door mechanism.
- Do not push the CD tray – always use the OPEN/CLOSE button.
- It takes a moment for the unit to load a disc, during which all buttons will be temporarily
deactivated.
Repeat Playback
Each time the REPEAT button is pressed, the repeat mode will cycle through the following options:
REPEAT 1 (Repeat one track)
The “REPEAT 1” icon will appear on the display and the current track will be played
repeatedly. If you press the (
or
) button to select another track, the track you
select will be played repeatedly.
REPEAT ALL (Repeat the entire CD)
The “REPEAT ALL” icon will show on the display and the entire CD/CD-RW will be played
repeatedly.
To cancel the REPEAT mode, press the REPEAT button repeatedly till the icon disappears from the
display.
Shuffle Playback
Press the SHUFFLE button and the “SHUFFLE” icon will appear on the display. Playing the tracks on
a CD mode in a random sequence.
To cancel the shuffle playback mode, press SHUFFLE button again. “SHUFFLE” icon will disappear
from the display.
Notes:
- Repeat playback works with CD’s only.
- Pressing
(
)
during shuffle playback will randomly select the next track.
- A track cannot be repeated during shuffle playback.
- Shuffle playback doesn’t work during programmed playback.
Programmed Playback
You can program up to 20 tracks for a CD.
Notes:
- Shuffle playback does not work during programmed playback.
- Programmed playback works with finalized disc only.
1. Select “CD” mode, then load a CD.
2. While the CD is stopped, press the PROGRAM button.
3. “PROGRAM” icon will show and “P01” blinks on the display.
4. Press (
or
) to select a track number.
5. Press the PROGRAM button again to set the next program track, “P02” appears and blinks.
Repeat steps 4 through 5 to program the additional tracks.
6. When the selection of track numbers has been finished, press the PLAY/PAUSE
button (
) to start program playback.
(
Note:
when all 20 tracks are finalized, press the PROGRAM button
once and “FI” will appear on the display)
7. Press the STOP ( ) button twice to cancel the program mode and then
the “PROGRAM” will disappear from the display.