background image

 

 
Amplifier Dimensions: 
SIZE (mm): 598(W) x 475(H inc. handle) x 250(D) Unboxed.  698(W) x 575(H inc. 
handle) x 350(D) Boxed. 
Weight: 22Kgs Unboxed.  24Kgs Boxed 
 
Output Power: 
WARNING! The V10 while only rated at 10.5 Watts can still achieve a very high 
sound pressure level (SPL) so caution is required when playing near to the 
speaker or hearing damage may result.  

 

The following measurements were taken at 240V mains input into an 8 Ohm 
load using a 1 KHz Sine Wave with the output waveforms set just before 
clipping. The tone controls were set to give the best representation of a sine 
wave: 

 

Output Power NOVAL at 10, OCTAL at zero:  4.4 Watts  
Output Power Octal at 10, NOVAL at zero:  6.6 Watts  
Output Power NOVAL & OCTAL both at 10:  10.5 Watts  

 

Warranty 
All Victory products come with a 5 year limited warranty. This covers any 
defects in manufacturing or faulty components. Valves and speakers are 
warrantied for 90 days from the purchase date but replacement parts will be 
at our discretion. Please contact your local dealer if you have any issues with 
your Victory product. 
A note from Team Victory 
We’ve built your Victory Amplifier as a professional, no-compromise musical 
instrument, with a great deal of pride and an absolute commitment to tone. 
We encourage you to learn to get to know it by experimenting with all the 
controls, in order to discover its vast array of tonal combinations. 
Thank you for making your tones with us: we wish you many years of 
achieving inspiring sounds to push your playing ever onwards. 

 

Now I’ll shut up; you go play yer guitar.  
 
Contact info:          

[email protected]

   

Web:                        

www.victoryamps.co.uk

       

                                  

www.facebook.com/VictoryAmpsUK

 

 

Summary of Contents for V10 The Baron













Reviews: