Installation
Excessive Weight
Require two or more person to move and
install this range hood. Spinal or other bodi-
ly injuries could occur if it is not followed.
INSTALL THE HOOD
Due to excessive weight, two or more person is recommended for this step.
TEST THE RANGE HOOD PRIOR INSTALLATION
NOTE: the hood has to be installed, inside the cabinet, at
minimum 1/2” from the rear wall cabinet and at 1/2” from the front wall cabinet.
The internal height of cabinet has to be minimum 28”.
The hood should be mounted centered over the cook top burners.
1. Cut a hole in the bottom of the cabinet, using the dimensions shown in the table below (ref. to Fig. A).
2.
Insert the hood in the cabinet and secure with the mounting screws from the inner side of the range hood (Fig.
B).
Note: Wood blocking might need to be built if it’s not available in order to secure the mounting screws.
3.
Attach the 8” or 10” top vent duct
4.
Connect the hood the a power supply
Wood Blocking
Fig. B
Fig. A
Cut a hole in the bottom of the
cabinet
X
Y
Model
X
Y
Typhoon 28
28-3/8”
19-11/16”
Typhoon 34
34-3/8”
19-11/16”
Typhoon 40
40-3/8”
19-11/16”
Typhoon 46
46-3/8”
19-11/16”
Model
X
Y
Typhoon 52
52-3/8”
19-11/16”
Typhoon 58
58-3/8”
19-11/16”
