Operator
’s Manual Victory MATV Series
- Page 15 of 66 -
Version 2.0
◼
Always use replacement fittings having the same part number (or equivalent). Do not use
fitting of inferior quality.
◼
Do not make any repairs if you are tired or consume alcohol or drugs, affecting your ability to
work perfectly.
◼
PROTECT THE ENVIRONMENT: The handling and cleaning of spent oil or chemicals may be
subject to national or local laws and regulations. Use authorized waste processing services,
including Municipal facilities and garages, which provide official facilities for collecting oil and
chemicals.
◼
Contact the provincial or Municipal authorities or the Environmental Protection Service for
guidelines about handling correctly and cleaning up spent oil and chemicals if in doubt.
◼
Parts that rotate can cause cuts, mutilations or strangulation.
◼
Always switch OFF the engine before performing service and maintenance.
◼
Do not allow water or any other fluid to contact electrical components.
◼
Start the engine only after closing all machine protection guards and covers.
◼
Never use a high-pressure water beam for cleaning the gasoline engine, electrical components,
battery casing, and bearing blocs.
◼
Do not aim a high-pressure water beam directly at wiring, breathers, or sealings of drive
components.
◼
Always protect venting spots from the inlet of large amounts of water.
4.5
Additional Safety Rules for Flail mowers
◼
The operator should be familiar with all functions of the device.
◼
Mow with the implement from the ATV
driver’s seat only.
◼
Persons under 18 should NEVER operate or be near the mower during operation.
◼
Do not operate the MATV Flail mower while under the influence of drugs or alcohol, as severe
injury or death could result.
◼
Bystanders must keep a safe distance from an operating Flail mower (5 m.)
◼
Ensure all guards and shields are secured before operating the equipment.
◼
Do not operate the device for any purpose other than what it is meant for. (See warranty for
details.)
◼
Never open safety guards when the machine is working.
◼
Never bypass safety sensors or switches.
◼
Immediately push the emergency stop and switch off the engine if system parts emit smoke,
unusual odor, or unusual sounds. Otherwise, fire may start.
◼
Never leave the MATV flail mower unattended while it is running.
◼
Dismounting from a moving vehicle could cause severe injury or death.
◼
When mowing, watch for wires, trees, etc.
◼
Make sure all persons are clear of the working area.
◼
Turning the ATV too tight can result in injury or equipment damage.
◼
Inspect the flail mower regularly; check all fasteners and securing parts.
◼
Operating the mower in temperatures below freezing is NOT recommended. Hardened steel
(used on flails) can become brittle in temperatures below freezing and may result in breakage.
Summary of Contents for MATV 48
