Victory MATV 48 Operator'S Manual Download

Page: 12 / 66

Operator’s Manual Victory MATV Series

- Page 12 of 66 -

Version 2.0

3.7

Intended Users

Intended users are well-trained, technically skilled operators.

3.8

Intended Use

The MATV mower is intended to use as a gasoline-powered flail mower, coupled with a vehicle
suitable for the purpose, usually an ATV.

3.9

Unintended Use

Unintentional use is any other use than described under 'Intended use.'

3.10

Intended Operating Conditions

◼

Ambient temperature:

0° to + 40°C.

◼

Temp. transport/Storage:

−

10° up to + 40°C.

◼

Lighting:

Normal ambient lighting.

3.11

Tools, Parts, and Accessories for assembling and
adjusting

◼

Socket wrench set.

◼

Open-end wrench set.

◼

Adjustable wrench.

◼

Torque wrench.

◼

Measuring tape.

◼

Steel ruler.

◼

Allen Hex key set.

◼

Heavy leather gloves.

◼

This manual.

Summary of Contents for MATV 48



































































Search results

Summary of Contents for MATV 48

Reviews:

Related manuals for MATV 48

Brands by name

Popular brands

Victory MATV 48, Operator'S Manual

Search results

Summary of Contents for MATV 48

Reviews:

Related manuals for MATV 48

Brands by name

Popular brands