Victory Gas Grill Owner’s Manual
Page 10
8
8a
6
7
ASSEMBLY INSTRUCTIONS
Now for the Cart Support Bar (12), which
you attach by screwing 2 CC Screws into
the nutserts in the floor and back wall of the
grill cart. Fully tighten these screws, along
with all other screws you left slightly loose
in prior steps.
Align the Left Cart Door (5) and Right Cart
Door (21) using the alignment pin located on
the bottom of each door.
Once the doors have been installed, attach the
Match Holder (22) to the Right Cart Door using
1 DD Screw. Now’s a good time for an optional
beer break!
Attach the upper door pin to the and the
Cart Wall Panel by first removing the existing
screws, lifting the bracket upward inside
the wall, and rotating it down into the door
alignment hole. Once aligned in the Cart
Wall Panel and Cart Door, firmly tighten the
bracket using the 2 existing screws.
