Victory Motorcycles Kingpin 2004 Manual Download Page 60

Page: 60 / 162

PRE-OPERATION CHECK

Check Rear Suspension

Proper rear suspension adjustment is essential for a safe and comfortable ride. Check the rear shock absorber

movement and preload to ensure that the motorcycle has the correct amount of suspension travel and ground

clearance (see page 92).

Inadequate ground clearance could allow components to come into contact with the ground,
causing loss of control.

WARNING

Check Drive Belt

The drive belt should fit tightly. Check drive belt tension (see pages 86-87).
Replace the drive belt if it is cracked or has broken teeth or frayed edges (consult your

VICTORY Service Manual

an authorized VICTORY dealer).

Summary of Contents for Kingpin 2004



































































































































































Search results

Summary of Contents for Kingpin 2004

Reviews:

Related manuals for Kingpin 2004

Brands by name

Popular brands

Victory Motorcycles Kingpin 2004, Manual

Search results

Summary of Contents for Kingpin 2004

Reviews:

Related manuals for Kingpin 2004

Brands by name

Popular brands