1
The wood glue is used to secure the wood dowels to various
wood parts during assembly. Please use caution, and follow
the instructions below, when gluing the dowels into the holes:
a. Fill hole 1/4 full of wood glue.
b. Slowly push dowel into the hole.
c. Wipe away excess wood glue.
1. Shelves – maximum load weight per shelf is 50 pounds.
2. Top of Cabinet – maximum load weight on top of cabinet 100 pounds.
1. Please read the assembly instructions prior to assembling the product.
2. To avoid damage, assemble the product on a non-abrasive surface such as carpet.
3. Make sure all screws and bolts, cam locks are tightly fastened before the product is used.
4. Not for commercial use.
5. Care: Wipe with a damp cloth. Use furniture polish or lemon oil on the wood as needed. Avoid
prolonged exposure to moisture.
a
G e n e r a l I n f o r m a t i o n , T i p s & Tr i c k s
Please make sure you have all parts before beginning assembly. Please wait until all
steps are finished before completely tightening bolts and cam locks/screws. We
recommend using two people for assembly.
M A X I M U M R E C O M M E N D E D W E I G H T L OA D S
Both a Philips and slotted head screwdriver (not included) are
necessary for assembly.
Use the slotted head screwdriver to tighten the cam locks.
Metal dowel screw and cam lock assembly techniques:
a. Screw the metal dowel screw into the predrilled plastic hole.
b. Attach both panels. Ensure the head of the metal dowel screw is
centered in the predrilled hole of the second panel. If it is not,
then screw it in farther or back it out until the head is centered.
c. Insert the cam lock into the predrilled hole over the head of the
metal dowel screw. Use a Phillips screwdriver and turn the cam
lock until tight, which is about one-half turn. Remember –
completely tighten cam locks only after the entire unit is
assembled.
