background image

 

 

 

 

 

   

 

PROBLEM 

CORRECTIVE ACTION 

Leak at collar o-ring 

Remove  valve  assembly,  remove  and  discard  o-ring,  clean  collar 

and  lube  lightly  with  Visilox  V-711.    Clean  o-ring  groove  on 

valve and install new collar o-ring.    Lubricate with Visilox V-711.   

Leak through valve 

Check  valve  stem  seating  area  for  scratches  or  foreign  matter.   

Clean seating area with a tooth brush and soft cloth.    Install new 

valve stem assembly. 

Leak around gauge 

Remove  gauge*,  clean  threads  and  reinstall  using  Teflon  tape  on 

the gauge threads. 

Defective gauge 

Remove  defective  gauge*  an  install  the  proper  Victory  pressure 

gauge using Teflon tape on the gauge threads. 

Defective cylinder 

Contact  Victory  if  under  warranty,  otherwise  mark  "REJECTED" 

and remove from service or return to owner. 

 

 

LIMITED WARRANTY   

   

Victory  warrants  its  fire  extinguishers  (“Products”)  to  be  free  from  defects  in  material  and 

workmanship for a period of six (6)  years from the date of manufacture. Victory’s responsibility 

for defects in material or workmanship are limited to repair or replacement of the products for the 

original retail purchaser (“Consumer”) only. This limited warranty does not cover defects resulting 

from  modification,  abuse,  accident,  alteration,  misuse,  exposure  to  corrosive  conditions,  or 

improper  installation  or  maintenance.  Victory  is  not  responsible  for  the  installation  or  the 

maintenance of the Products.   

   

Defective Products for  which  a valid claim has  been  made shall be returned to  Victory’s facility 

for  repair  or  replacement  (or  to  other  repair  facilities  pursuant  to  Victory’s  prior  written 

authorization), and transportation costs to such locations shall be paid by Consumer.     

   

VICTORY  DOES  NOT  ACCEPT  LIABILITY  BEYOND  THE  REMEDIES  PROVIDED  IN 

THIS LIMITED WARRANTY, WHETHER BASED ON CONTRACT, NEGLIGENCE, STRICT 

LIABILITY OR OTHERWISE, INCLUDING WITHOUT LIMITATION DAMAGES FOR ANY 

PERSONAL  INJURY,  PROPERTY  DAMAGE,  OR  ANY  DIRECT,  INDIRECT,  SPECIAL, 

CONSEQUENTIAL,  INCIDENTAL,  EXEMPLARY  OR  PUNITIVE  DAMAGES,  AND 

INCLUDING  WITHOUT  LIMITATION  ANY  LIABILITY  FOR  THIRD  PARTY  CLAIMS,  IN 

EACH  CASE  EVEN  IF  STRIKE  FIRST  HAS  BEEN  ADVISED  OF  THE  POSSIBILITY 

THEREOF.  LAWS  OF  SOME  JURISDICTIONS  DO  NOT  ALLOW  THE  DISCLAIMER  OF 

CONSEQUENTIAL  OR  OTHER  TYPES  OF  DAMAGES,  AND  CONSUMERS  MAY  ALSO 

Summary of Contents for WC2.5GAL













Reviews:

Related manuals for WC2.5GAL