Victorinox CHRONOGRAPHS Watch Basic Operating Instructions Manual Download Page 7

Page: 7 / 66

- 6 -

The crown has three positions:
1. Normal position – recessed.
2. Extended position – to set the date.
3. Fully extended position – to set the time.

SETTING THE DATE AND TIME

(CHRONO TYPE I)

A. Pull out the crown to position (2).

B. Rotate the crown toward you until the date showing is the day

before the desired setting.

C. Pull out the crown to position (3) and rotate toward you. When

midnight is reached, the date will advance to the desired date.
Continue to turn the crown until the desired time is set.
Remember, the date advances at 12:00 midnight, not 12:00 noon.

D. Push in the crown, returning it to position (1). The date and time

are now set.

To Set Time Alone

Refer to instruction “C”.

Summary of Contents for CHRONOGRAPHS Watch



































































Search results

Summary of Contents for CHRONOGRAPHS Watch

Reviews:

Related manuals for CHRONOGRAPHS Watch

Brands by name

Popular brands

Victorinox CHRONOGRAPHS Watch, Basic Operating Instructions Manual

Search results

Summary of Contents for CHRONOGRAPHS Watch

Reviews:

Related manuals for CHRONOGRAPHS Watch

Brands by name

Popular brands