Victorinox AIRBOSS MACH 9, Quick Manual

Page: 3 / 12

PUSHERS :
A. Chronograph start / stop
B. Zero reset
TIMEPIECE INDICATIONS :
C. Hours
D. Minutes
E. Seconds
F. Date
CHRONOGRAPH INDICATIONS :
G. 60-second counter
H. 30-minute counter
I. 12-hour counter
TIME, DATE AND CHRONOGRAPH FUNCTIONS (Fig. 1) TIME, DATE AND CHRONOGRAPH FUNCTIONS
The crown has 3 positions :
1. Normal position, occasional winding
2. Setting the date
3. Setting the hours and minutes,
stop-seconds
SETTING THE TIME :
1. Wind the movement if necessary.
2. Pull the crown out to position
3 .
The seconds hand will stop.
Remember the date advances at
12:00 midnight, not 12:00 noon.
3. Turn the crown to position the hands
to the desired time.
4. Push the crown back into position
1
.
SETTING THE DATE:
1. Wind the movement if necessary.
2. Pull the crown out to position
2 .
3. Turn the crown clockwise until the
desired date is reached.
Note : the date cannot be corrected
between 8:00 p.m. and 2:00 a.m.
4. Push the crown back into position
1 .
CIRCULAR SLIDE RULE (Fig. 2)
I = Fixed units of measurement (engraved on the watch case)
II = Rotating inner bezel (slide rule)
X = Screw for adjusting the rotating inner bezel (
II )
EXAMPLE : How can I multiply 8 × 12 ?
1. Always use the red number 10 as a starting point for your calculations.
2. Adjust the inner bezel ( II ) using the screw ( X ) until the red number 10 is
aligned with 80 (for 8) on the outer ring ( I ).
3. Find number 12 on the inner bezel ( II ).
Read off the number on the outer ring (
I
) that is aligned with the 12 on the inner
bezel ( II ) for your result (in this case, 96).
For more everyday examples, watch our instructions movie at www.victorinox.com
Service > Product Support > Watches > Instructions
Fig. 2
Fig. 1
X
II
I
1 2
G
C
3
A
B
D E F
I
H
1
2
3