SETTING THE DATE AND TIME
• Wind the movement if necessary.
• Pull out the crown into position 2. Rotate the crown
until the day before the desired setting.
• Pull out the crown into position 3. Rotate the crown. When midnight
is reached, the date will advance to the desired date.
• Make sure that the position of the hands corresponds to a change
of date at midnight and not at noon.
• Turn the crown away to pre-position the hands on the desired time.
• Push the crown back down firmly against the case in position 1.
TO SET TIME ALONE
• Wind the movement if necessary
• Pull out the crown to position 3. The seconds hand will stop.
• Turn the crown away to pre-position the hands on the desired time.
• Push the crown back down firmly against the case in position 1
and the watch will begin to run again instantly.
USING THE VISUAL COUNTDOWN (AIRBOSS MACH 2 - 3 - 4):
Refer to page 8.
11
AIRBOSS MACH 2
MECHANICAL (SELF-WINDING)
The watch is wound automatically
when worn on the wrist. If the watch
is not worn on a daily basis, the
movement will have to be wound
manually by turning the crown away
from you at least twenty times in
position 1.
10
1
2
3
C
