Safe Work Procedure
Quad Bike-Operation (SWP-083)
File
R:\60-Reference\JointProjects\DELWP-JSP\SWPs\PlantEquipment\SWP-083-v3.0.doc
Version
Page 4 of 5
Printed 5/04/2016 - 12:39
Unless stamped “CONTROLLED COPY” in RED, then when printed this document is uncontrolled.
1.
Moderate speed when operating on slopes.
2.
Use low ratio gear when going up or down a slope.
3.
On side slopes lean and steer slightly up hill.
4.
Avoid slopes greater than 25 degrees where possible.
5.
When operating on steep slopes do not carry loads.
Spraying
1.
When carrying out tasks such as spraying maintain a slow speed and seek a path that
provides the best visibility of any potential obstruction or hazard.
2.
Be aware that liquid loads can cause sudden shifts to the centre of gravity of the bike when
riding over uneven terrain.
3.
Assess the terrain before riding over it.
4.
Check the area ahead for hazards such as rocks, tree stumps, burrows or branches.
5.
Ensure spray trailer is empty and minimum distance to quad to reduce exertion required
when hitching trailer.
Loads and towing
1.
Do not exceed the manufacturer’s load limitations and specifications.
2.
Only carry loads on the front and/or rear racks of the quad bike or on compliant
attachments.
3.
Always connect attachments to the towing point of the quad bike.
4.
Ensure loads, equipment and tools are stable and secured.
5.
Keep loads low.
6.
Use lower gear, reduce speed and allow a longer braking distance when carrying loads.
7.
Avoid hills and rough terrain.
Refuelling
1.
Allow quad bike to cool down before refuelling.
2.
Ensure there is no smoking, naked flames or other ignition sources within 30 metres.
3.
Make certain there is adequate ventilation.
4.
Use a funnel to prevent spillage.
8.4
Post-use
1.
Remove and secure keys.
2.
Report any damaged or faulty equipment.
3.
Report any incidents, hazards and near misses.
Revision History
