12
e)
Threading with 2 needles
If you have inserted the
twin needle
, as
described in Chapter 8:
• Pull out both
roll pins
and put on
two spools of thread.
You can put a
felt pad
under the
spool of thread, to protect the
machine casing.
• Pass the two
upper threads
through,
just as you would for a single thread,
...
until the threads are at the needle:
but in this case, thread the two ends
of the upper threads
separately
through the two
needle eyes.
• The
lower thread
is also passed
through and collected in the same
way as for the single thread.
8.
Attaching accessories
Warning!:
First pull the power plug out of the
power socket!
This will prevent the
machine from being started unintention-
ally while you are working.
a)
Changing needles
First raise the needle fully, by turning
the handwheel.
Loosen the
clamping screw
and
take out the old needle.
Insert the new needle, with the
flat
end towards the rear.
Insert it up to
the top
and turn the
clamping screw
to lock
it in place.
IB_Sewingmachine_content_UK.qxd 22.07.2004 12:21 Uhr Seite 12
