20
TRANSPORT AND MOVEMENT
MACHINE IDENTIFICATION
For any communication with the manufacturer
Victoria Arduino, always quote the machine's
number plate.
The machine is carried in pallett with other
machines in cardboard boxes fastened to the pal-
lett through centring or ropes.
Before carrying out any transport or movement
operations, the operator will have to:
• wear gloves and shoes suitable for accident-preven-
tion and an overall with elastic bands on the limbs.
The pallett transportation has to be carried out
with a suitable lifting means (like a forklift truck).
WARNING! D
ANGER OF CRASH OR COMPRESSION
The operator during the movement, has always
to pay attention that people, things or objects
are not in the way in the operation's area.
Lift the pallett slowly at about 30 cm from the
ground and reach the loading area. After
checking that there are no obstacles, things nor
people, proceed to the loading.
Once you get at destination, always using an
adequate lifting means (e.g. forklift truck), after
making sure there aren't things nor people in the
unloading area, take the pallett to the ground
and move it up to 30 cm from the ground, until
the stocking area.
WARNING! D
ANGER OF CRASH OR COMPRESSION
Before performing the following operation,
check the load is safe at its place and that when
cutting the centring or ropes it doesn't fall down.
The operator wearing gloves and shoes for acci-
dent-prevention, will have to proceed to the cut-
ting of the centring or ropes and to the stocking
of the product. During this operation, please
check the technical characteristics of the product
to see the machine's weight to be stocked and
be able to act consequently.
WARNING! DANGER OF POLLUTION
Once you have freed the machine from the pal-
lett or the container, dispose of it carefully, dan-
ger of pollution.
02_Athena_Leva_UK.qxp 25-10-2006 8:45 Pagina 20
