19
TRANSPORT AND MOVEMENT
MACHINE IDENTIFICATION
For any communication with the manufacturer
Victoria Arduino, always quote the machine's num-
ber plate.
The machine is carried in pallett with other machi-
nes in cardboard boxes fastened to the pallett
through centring or ropes.
• wear gloves and shoes suitable for accident-pre-
vention and an overall with elastic bands on the
limbs.
The pallett transportation has to be carried out with
a suitable lifting means (like a forklift truck).
WARNING! D
ANGER OF CRASH OR COMPRESSION
The operator during the movement, has always to
pay attention that people, things or objects are not
in the way in the operation's area.
Lift the pallett slowly at about 30 cm from the
ground and reach the loading area. After checking
that there are no obstacles, things nor people, pro-
ceed to the loading.
Once you get at destination, always using an ade-
quate lifting means (e.g. forklift truck), after
making sure there aren't things nor people in the
unloading area, take the pallett to the ground and
move it up to 30 cm from the ground, until the
stocking area.
WARNING! D
ANGER OF CRASH OR COMPRESSION
Before performing the following operation,
check the load is safe at its place and that when
cutting the centring or ropes it doesn't fall down.
The operator wearing gloves and shoes for acci-
dent-prevention, will have to proceed to the cut-
ting of the centring or ropes and to the stocking
of the product. During this operation, please
check the technical characteristics of the product
to see the machine's weight to be stocked and
be able to act consequently.
WARNING! DANGER OF POLLUTION
Once you have freed the machine from the pal-
lett or the container, dispose of it carefully, dan-
ger of pollution.
02_Athena_Semiautomatica_UK.qxp 20-10-2006 12:19 Pagina 19
