17
2 in 1 Aerator & Scarifier
H466 OR
Instructions for Use
Please read and retain these instructions for future reference v001: 25/09/20
Page No. 17
Fit the cable holder (11) onto the upper handle bar from the switch side (Fig.7).
Lower handle assembly on the deck:
• Make sure the metal handle in the slot of angle adjust block(9) fig 3.2
• Insert the quick clamp (12) from outside in the hole of machine body, rotate the quick
clamp to adjust the tightness of the lock and then lock the trigger to make the handle in
position (Fig. 3.3-3.4).
Grass Bag Assembly (FIG. 4.1-4.2)
• Fix the metal frame inside the damping rims of cloth-bag (Fig.4.1)
• Mount the grass collector bag on the hooks on main body as shown in the picture (Fig.4.2)
Height Adjustment (FIG. 5)
Push the height adjust handle (1) forwards or backwards to adjust the height.
The working position can be lowered with increased knife and sprung tine wear.
Wear can be identified from an increasingly poor result. The readjusting depth amounts to
approx. 3 mm per setting. Use the millimeter scale readings for fine setting.
The implement must be switched off to set the working position.
Blade System Change (FIG. 6.1-6.5)
• Turn over the machine to motor side in dry place and loosen wing nut by turning
counter-clockwise to open the lock (Fig. 6. 1-6.2).
• Pull the flange of the blade system up from the coupling in the machine body (Fig. 6.3).
• Pull the original blade system upward to detach it from the machine body (Fig. 6.4).
• Insert the aerator blade system inside is the revised process of scarifier blade system
detached(fig.6.5)
