5 . Set the rotation control switch to the
FORWARD position . Victaulic cut grooving
tools are designed to operate in a
CLOCKWISE direction when viewed from
the square drive shaft side of the tool .
WARNING
• Always maintain a light grasp on the
handle of the power head during tool
operation.
Failure to follow this instruction could
cause the power mule to walk away from
the tool, causing serious personal injury
and/or product damage.
6 . Grasp the handle of the power head .
Momentarily depress the safety foot switch,
and check the rotation of the power head .
Rotation shall be CLOCKWISE . If the
rotation is counterclockwise, place the
rotation control switch to the REVERSE
position .
7 .
Groove the pipe by following the operating
instructions for the applicable cut grooving
tool .
NOTE:
Always maintain a light grasp
on the handle of the power head during
tool operation .
TM-PMII_13
REV_C
TM-PMII
/ Operating and Maintenance Instructions Manual