manualshive.com logo in svg

Victa V82VWMK, Operator'S Manual

Share
Download
Victa V82VWMK Operator'S Manual Download Page 14

13

Cleaning the Mower

The following steps should be taken in order to prepare the lawn mower for storage.
• Clean the mower as described in the previous section.
• Inspect the blade, and replace it or sharpen it, if required (refer to the Maintenance section).
• Store the mower in a dry, clean location. Do not store it next to corrosive materials, such as 
fertilizer or rock salt.
• Store the mower indoors, in a cool, dry place, out of the reach of children. Do not cover the 
lawn mower with a solid plastic sheet. Plastic coverings trap moisture around the mower, which 
causes rust and corrosion.
• Remove the battery and store it in a cool dry location, if possible. Charge the battery every 
three months when not in use in order to increase its life.
• Remove the battery and store in a secure location out of the reach of children. 

This battery must be charged every 3 months while in storage to maintain maximum capacity.

NOTE: Refer to figure 11.

• Remove the battery from the mower.
• Remove the grass catcher bag.
• Rotate the handle knobs to the unlocked position.
• Lower the handle assembly and rotate the handle knobs to the locked position.
• Lift the mower by the front end to the vertical position.

ALWAYS remove the battery from the mower before placing the unit in the vertical storage 
position.
When storing vertically, ensure the location is out of reach of children.

Storing the Mower

WARNING

WARNING

Vertical Storage Function

WARNING

ALWAYS remove the battery when cleaning the mower.

To reduce the risk of electric shock, do not expose the mower to water.

Do not use solvents, strong detergents, certain aromatic oils such as pine and lemon when 
cleaning plastic parts. Chemicals can damage, weaken or destroy plastic component which 
may result in serious personal injury.

•  Remove any build-up of grass and leaves on or around the motor cover (do not use water) 
by wiping the mower clean with a dry cloth or brushing.

•  The underside of the mower deck should be cleaned after each use, because grass clippings, 
leaves, dirt, and other debris will accumulate, which will cause rust and corrosion.  . If debris has 
built up on the underside of the mower during use, stop the motor, disconnect it from the battery, 
and then tilt the mower on its side, and scrape it clean using an appropriate tool.

Not for 

Reproduction

Summary of Contents for V82VWMK





















Reviews:

No comments

Brands by name

Popular brands

Load more brands