ASSEMBLY
PROCEDURES
8
Handle assembly
Note:
Ensure the control cable is not twisted,
pinched or damaged when assembling
the dual fold handle.
3. Thread one of the nuts onto the top of the
bolt and tighten with fingers. Then torque the
NUTTO.M-AXIMUM
4. Repeat steps 1 & 3 on the right side,
as shown.
5. Attach the dual fold centre handle
using the locking levers and nuts
provided. The locking levers should
be on the outside, as shown.
!TTACHTHEDUALFOLD5PPERHANDLE
using the locking levers and nuts
provided. The locking levers should
be on the outside, as shown.
.UT
.M
3.
5.
Not
for
Reproduction
