Victa 881873 Assembly And Owner'S Manual Download Page 7

Not for 

Reproduction

Recommended personal protection equipment to wear when working with your lawnmower:

 

A set of ear muffs.

 

A pair of protective gloves.

 

A pair of safety boots.

 

Eye protection.

4

The following safety precautions must be strictly observed to avoid the risk of damage or 

personal injury.
•   Do not smoke while operating or refuelling the mower.  Never add fuel or remove the fuel 

cap while the engine is running or hot.  If fuel is spilt, do not start the engine.  Move the 

mower away from the area of the spill. Do not create any source of ignition until the fuel 

vapours have dissipated.

•   Check all fasteners regularly. Always ensure that the mower is in safe operating condition. 

Use genuine spare parts only.

 •   Do not operate the mower in confined spaces where exhaust fumes (carbon monoxide) 

can collect.

•    Stop the engine whenever you leave the mower, even if only for a moment.  
•   Stop the engine when emptying the grasscatcher. Never try to clear grass from inside the 

mower while the engine is running.

•  Never lift, carry or tilt the mower when the engine is running.
•   Bystanders must be at least 15 metres away during operation of the mower, as rocks 

and other materials may be thrown at high velocities. Switch the unit off immediately if 

approached.

•   Never use the mower unless the grasscatcher and/or the rear flap are correctly 

assembled and fitted.

Hazards

Personal Protection Equipment

Summary of Contents for 881873

















Reviews: