VICOR VI Chip PRM-RS, User Manual, Page: 9 / 19

User Guide UG:008
vicorpower.com 800-735-6200 Rev. 1.1 11/10
Page 9 of 19
5.2 VTM Customer Board Type B (Dual Connectors)
The VTM Customer Board Type B contains dual connectors designed to mate with both X01 and
X03 on the half-chip PRM-RS Customer Board. The additional connector is used to transfer VTM
signal pins, as well as the VS+ and VS- signals between boards. The VS+ and VS- signals are tied
directly to the VTM output and can be used for implementing remote sense as described
in a later section.
Figure 7: VTM Customer Board
Type B
NC
NC VS+
VS-
IM-VTM
PC-VTM
TM-VTM
-IN
-IN
-IN
-IN
+IN
+IN +IN
+IN
VC
VC
VTM TYPE B
Power / Signal Connector
VTM TYPE B
Signal Connector
VTM -IN
Figure 8: VTM Customer Board
Type B
Connector Pinout (Front View)