VICOR VI Chip BCM, User Manual

Page: 5 / 7

UG:001 Page 5
Recommended Hardware
All hardware is stainless steel except the ring lug.
Kit # 26647 is included with the evaluation board.
Thermal
For most lab environments a fan blowing across the evaluation board is recommended.
See Application Note AN:008 or contact Vicor Applications Engineering for assistance.
Caution
The BCM ® and evaluation board can comfortably operate at surface temperatures which may pose a
thermal hazard to the operator. Be careful not to touch any exposed surface. Certain BCMs may operate
at potentially dangerous voltages, use care in such cases. The evaluation board is not intended for use in
end item equipment.
Ordering Information
The BCM evaluation boards can be ordered from the Vicor website:
www.vicorpower.com .
To order the demo boards, substitute BCM with BCD in BCM part number.
See http://www.vicorpower.com/dc-dc/isolated-fixed-ratio/lv-bus-converter-module
for part number listing.
Table 1
Hardware
Quantity
Description Manufacturer P/N Vicor P/N
4 ring lug Panduit LCA56-10-L
4 #10-32 screw
}
Kit #26647
4 #10 flat washer
4 #10 lock washer
4 #10 hex nut