background image

 

UG:118 

vicorpower.com  

Applications Engineering: 800 927.9474 

Page 1

Features

n

  Oscilloscope probe jack for output voltage and ripple measurements

n

  Simple to use

n

  Ring lug connections

Introduction

The Customer Evaluation Board offers a convenient means to evaluate the 
performance of Vicor’s high density converter (HDC) Brick module and has been 
optimized for user convenience. Please refer to the appropriate HDC datasheet for 
performance and operating limits. The datasheets are available for downloading at

 

vicorpower.com

.

 

Please refer to Figure 1 for locations of the input and output connections as viewed 
from the component side. Wires may be soldered directly to the pads instead of ring 
lugs if desired to minimize circuit impedances.  

NOTE: 

The Customer Evaluation Board has footprints for both A and B Series HDC modules, but only 

one module can be populated on the evaluation board.

HD Series Brick Evaluation Board 

USER GUIDE  |  UG:118

Written by: Michael DeGaetano 
Associate Product Line Engineer
July 2014

Contents Page

Features 1

Introduction 1

Set Up 

2

Recommended 3
Hardware 

Thermals 3

Ordering Info 

3

Test Point List 

4

Bill of Materials 

4

 

Summary of Contents for HD Series







Reviews: