UG:107
Page 14
3-Phase and 4kW MegaPACs™ Quick Install Instructions (Cont.)
J2 Trim Connection (and P2 for UniPACs™)
n
n
The J2 remote Trim connection should only be used if the local Trim option has not been installed.
(A “T” or an “F” in the ConverterPAC™ part number means the Trim option is installed;
e.g., M5V/40AT.)
n
n
Use Molex mating receptacle #50-57-9403 with #16-02-0103 terminals provided and 22 – 24AWG
stranded wire using Molex tool 63811-8700.
n
n
J2-1 provides Trim access.
n
n
For the UniPAC, refer to P2 Connector. P2-5 provides Trim Access.
n
n
Use Molex mating receptacle #50-37-5073 with #08-70-1040 terminals provided.
n
n
Attach terminals to 22 – 28AWG stranded wire using Molex tool #63828-1900.
DC OK (Power Good)
n
n
DC OK is only available as an option and is only present when requested.
n
n
Use Molex mating receptacle #50-37-5043 with #08-70-1040 terminals provided.
n
n
Attach terminals to 22 – 28AWG stranded wire using Molex tool #63828-1900.
n
n
For the UniPAC, refer to the P2 Connector. P2-3 is Power Good.
n
n
Use Molex mating receptacle #50-37-5073 with #08-70-1040 terminals provided.
n
n
Attach terminals to 22 – 28AWG stranded wire using Molex tool #63828-1900.
Interface Connections J10
n
n
J10-7 to 11 and J10-20 to 24 are Enable / Disable for slots 1-10.
n
n
J10-16, 17 are V
CC
, J10-12 and 15 are Signal Ground, J10-18 is AC Power OK,
and J10-5 is General Shut Down.
Gate #1 Input (isolated)
25
J10 INTERFACE CONNECTOR IDENTIFICATION
Analog Temperature
Overtemperature Warning
14
1
16
15
2 3 4
19
18
17
5 6
22
21
20
7 8
9
24
23
11
10
12
Signal Ground
1
Enable/Disable #8
Enable/Disable #10
No Connection
General Shutdown
Signal Ground
Signal Ground
Enable/Disable #2
Enable/Disable #4
Enable/Disable #6
7
13
12
11
10
9
8
4
6
5
3
2
13
A.C. Power Fail
A.C. Power OK
V
CC
+5V, 300mA
V
CC
+5V, 300mA
Signal Ground
Enable/Disable #7
Enable/Disable #9
Phase Fail
Gate #10 (Output (Isolated)
Enable/Disable #1
Enable/Disable #3
Enable/Disable #5
14
19
18
17
16
15
21
25
24
23
22
20
J2 Connectors
1
2
3
Sense Connector
J2-1 Trim Pin Access
J2-2 +SENSE
J2-3 –SENSE
Pin
J2
4
3
2
1
J3
4 V
CC
3 Power Good
2 Power Good Inverted
1 Signal Ground
Pin
DC OK (Power Good)
J3 Connectors
Power Good Inverted
6
Signal Ground
7
Power Good
V
CC
IN
–SENSE
+SENSE
Trim
5
4
2
3
1
PIN
P2
J3 Connectors
