Viconte VC-1924, Instruction Manual

Page: 4 / 14

4
Remover is in use, keep it away from the hair on your scalp, your eyebrows, eyelashes
as well as clothes, brushes wires, cords, shoelaces, etc.
 Do not continually rub the unit on the same area or apply strong pressure.
 Keep the protective cover on your unit when it is not in use.
 Do not disassemble this device.
BEFORE FIRST USE
• Remove all package.
• Remove the battery cover (Battery cover lock piece) by
turning it 90 degrees to the left until it clicks into place (fig.
1) and then pull it down (fig. 2).
• Insert 2xAA alkaline batteries in the battery compartment
following the battery direction sign (fig. 3) as imprinted on
the back of the unit.
• Close the battery cover by turning it 90 degrees to the right
(fig. 4) until the cover clicks into place and locks (fig.5).
INSTRUCTIONS FOR USE
 Wash and clean the skin and dry fully.
Note : Do not use on broken or bleeding skin.
 Make sure the Roller Head is placed into the unit. See section of Changing the Rollers
Grinding Head on how to remove and replace head.
 Remove the protective cover from the unit and it is ready to Use.
•
Put
sufficient
quantity of
cold water
into your
Turkish
Coffee